WE CAN THEN ALSO OFFER THE FOLLOWING SERVICES:
Testing of playground equipment and playgrounds
Playground equipment for public areas must meet the safety requirements of DIN EN 1176. Playground equipment manufacturers must prove that the facilities they build or sell conform to standards.
The test can be carried out on site (in the case of factory-assembled systems) or in the factory on the pre-assembled play equipment.
Tests for the commissioning of playground equipment
Before putting a playground or play equipment into operation, it is mandatory to carry out a commissioning test in accordance with DIN EN 1176. Of course, certificates or the like supplied with the device are not sufficient for commissioning (the installation location, correct assembly, distances and traffic area protection must of course also be considered).
Main inspections of playground equipment according to DIN EN 1176
In addition to the visual and operational inspections, playgrounds are subject to a general inspection at least once a year
undergo.
Attached are some excerpts from our test reports - here a sports field test. I have omitted the exact data, such as the exact location and address, for data protection reasons. For each tested piece of gaming or sports equipment (here soccer goals), there is a picture for the client for optimal assignment as well as a factual comment and on the right side according to the traffic light principle a classification/recommendation for action:
GREEN - everything ok!
YELLOW - urgently check and improve!
RED - imminent danger, immediate removal!
